To Repair & Prepare Use NOVUS No.3
Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with NOVUS No.2 polish.
Requires use of NOVUS No.2 for final finishing
Not recommended for use on coated plastics
NOVUS No.3 Removes Heavy Scratches from Most Acrylics.
Remove surface dirt and dust with NOVUS No.1.
Shake well. Test in an inconspicuous area.
Apply NOVUS No.3 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times.
Continue polishing until only fine scratches remain. Using cloth, remove all remaining polish, this is very important!
Using a clean cloth, apply NOVUS No.2 in a circular motion uniformly to entire surface. Polish using light pressure until NOVUS No.2 dries to a light haze.
Using a clean portion of the cloth, buff the surface clean. Follow with NOVUS No.1 for best results.
Important Points to Remember: Before attempting to clean or remove scratches, always make sure the plastic is cool to the touch. Use a liberal amount of plastic cleaner to safely remove surface dust and dirt. In addition, test scratch removers in a small or inconspicuous area for compatibility. Some plastics are coated with a thin film which may be damaged by the abrasives in the polish. NOVUS No.2 and No.3 are not recommended for use on eyeglass lenses. - PC-30
Customer Ratings & Reviews
Be the first to rate this item!